| BASIC | Bucket Capacity | 0.65m³ |
|---|---|---|
| Rated Payload | 1200kg | |
| Operating Weight | 4370kg | |
| Traction Force | 39kN | |
| Breakout Force | 28kN | |
| L×W×H | 5820×1890×2810mm | |
| ENGINE | Manufacturer/Model | YN2 7（ N ation Ⅱ） |
| Rated Power | 36.8kW/2400rpm | |
| Rated Torque | 245N·m/1600-1800rpm | |
| DRIVE TRAIN | Transmission Type | Countershaft Powershift |
| Shift Type | Fixed Shaft Hydraulic Shift Spur Gear | |
| Pressure of Transmission | 1.2-1.5MPa | |
| Gear | 2F/2R | |
| Torque Converter | Single-stage, Single-turbine, 3-element | |
| Torque Ratio | 3.7 | |
| Main Reducer | Spiral Bevel Gear Single-stage Reduction | |
| Final Reducer | Planetary Reduction | |
| Tire | 16/70-16 | |
| Travel speed-Forward | 16 km/h | |
| Travel speed-Reverse | 16 km/h | |
| BRAKE SYSTEM | Service Brake | Air Drive, Four Wheel Brake (Dry) |
| Setting Pressure | 0.78MPa | |
| Parking Brake | Flexible Shaft Controlled Drum Brake | |
| STEERING SYSTEM | Type | Hydraulic Load Sensor System |
| Steering Pump | Shared With Working Pump | |
| System Pressure | 14Mpa | |
| Steering Angle | ±35° | |
| HYDRAULIC SYSTEM | Type | Pilot Control |
| Working Pump | Gear Pump | |
| Flow Rate | 100L/min·2400rpm | |
| Control Valve | 2 Spool | |
| System Pressure | 16MPa | |
| Cycle Time (Sec) | 8.23 | |
| ELECTRIC SYSTEM | System Voltage | 24V |
| Battery （ 2 in series) | 2x55 Ah | |
| SERVICE REFILL CAPACITY | Fuel Tank | 90L |
| Hydraulic Tank | 60L | |
| Transmission | 17.5L | |
| Front Axle / Rear Axle | 20L |
Current Location
PRODUT
Lonking CDM926N 1-2T Wheel Loader
Publish time 2023-08-16 15:42
Pilot Control Yunnei NationⅡ Engnie
Configuration parameters